TEL 86-577-65063600 : FAX 86-577-65063601 Email:swisor@outlook.com

For more information about fuel pumps theory, improving fuel pumps accuracy, and calibration techniques, see the
Swisor Auto Parts Technical Reference Manual.

Request a Copy

Download

Reference Manual



 

 

Reference Section--Safety Instructions

Allow vehicle to cool before starting.
Disconnect negative battery terminal before starting.
For current protection, use a maximum 20-amp fuse.
Check or replace oil-pressure safety switch,
Support vehicle on stands, not jacks.
Keep a Class B/C fire extinguisher nearby.
Don't smoke when servicing fuel systems.
Ventilate service area; duct exhaust outside.
Avoid open flames from matches, lighters, and torches in or near the service area.
Use a shielded fluorescent droplight instead of an incandescent bulb; turn off soldering irons.
Clean up fuel spills right away; dispose of fuel-soaked rags and absorbent properly.
Relieve fuel pressure before opening the system. Otherwise, high-pressure fuel spray might cause a fire or other personal injury.
Always replace tank ring seal to prevent leaks.
Never use a finger to check fuel injector pattern or pressure. High-pressure fuel can penetrate unbroken skin, causing illness.
Never energize fuel injector with fuel line connected except when following OE service manual for procedures and precautions.
After working on fuel system, always check for leaks.
Important Safety Precautions!
WARNING: High-pressure fuel systems should be serviced by qualified technicians. Leaking liquid fuel may ignite and fuel vapors may explode, both resulting in personal injury and/or property loss. Read vehicle repair manual for safety precautions, then follow these guidelines to protect yourself and others.
Work Clothing --Wear a long-sleeved shirt, long trousers, and safety shoes. Don't wear a ring or watch that might draw an electric spark. If fuel spills on your clothing, change it right away.
Eye Protection --Wear safety goggles or safety glasses. If fuel splashes into eyes, flush with water first, then go for emergency medical aid.
Fuel Hose --Never use standard low-pressure fuel hose in high-pressure fuel injection systems. Use high-pressure hose marked SAE R-7, or higher.

BACK

 
 Copyright 2005 Smart Fastening Inc . All Rights Reserved. Site Map      Web Master